Frequently Asked Question

Vendor Support for Opus
Last Updated 2 hours ago

Here's a summary table based on available information from manufacturer documentation and community sources. Note that Opus support is generally tied to firmware generation — older/legacy models typically lack it, while newer platforms include it.

Grandstream — Opus Support

Model / Series Opus Support Notes
GRP2612 / 2613 / 2614 / 2615 / 2616 ✅ Yes GRP series explicitly lists G.722 and Opus
GRP2650 / 2670 ✅ Yes Same GRP platform
GXP2130 / 2135 / 2140 / 2160 / 2170 ❌ No Older GXP2xxx — Opus not listed in datasheets
GXP1610 / 1615 / 1620 / 1625 / 1628 / 1630 ❌ No Legacy GXP16xx — no Opus
GXP1760 / 1780 / 1782 ❌ No Legacy GXP17xx — no Opus
GXV3350 / 3370 / 3380 ✅ Yes Android-based video phones support Opus
GHP620 / 630 series ❌ No Hotel phones — no Opus listed
WP820 / WP825 / WP826 ✅ Yes Wi-Fi phones on newer platform

Yealink — Opus Support

Model / Series Opus Support Notes
T41S / T42S / T46S / T48S ✅ Yes T4S series was first to add Opus
T41U / T42U / T43U / T46U / T48U / T53 / T54W / T57W ✅ Yes T4U/T5 series — Opus confirmed
T31 / T31P / T31G / T33G ❌ No T3 entry-level — no Opus
T41P / T42G / T46G / T48G ❌ No Pre-S generation — no Opus
T58A / T58W ✅ Yes Android video phones — Opus supported
CP920 / CP960 ✅ Yes Conference phones — Opus supported

Fanvil — Opus Support

Model / Series Opus Support Notes
X3S / X3G / X4 / X5S / X6 ❌ No Older X-series — Opus not listed (3CX codec templates confirm no Opus)
X7 / X7C ✅ Yes Higher-end X7 platform includes Opus
X210 / X210i ✅ Yes Executive series — Opus supported
H3 / H5 (Hotel) ❌ No Hotel phones — no Opus
i-series (intercoms) ❌ No Intercom/door phones — no Opus
V64 / V65 ✅ Yes Video phones — Opus supported

Sangoma — Opus Support

Model / Series Opus Support Notes
S206 / S300 / S400 / S500 ❌ No Older Sangoma/Digium phones — no Opus
P310 / P315 / P320 / P325 ✅ Yes Newer P-series (ARM-based) — Opus added per FreePBX community
P330 / P370 ✅ Yes Higher-end P-series — Opus supported

⚠️ Caveats:

  • Opus support can sometimes be enabled/disabled via firmware updates — always check the latest datasheet for your specific firmware version.
  • Entries marked ✅ may require a minimum firmware version to enable Opus.
  • For Fanvil and Sangoma in particular, per-model documentation varies — verify against the manufacturer's current datasheet before purchasing.
This website relies on temporary cookies to function, but no personal data is ever stored in the cookies.
OK
Powered by GEN UK CLEAN GREEN ENERGY

Loading ...